Updated NSE8_812 Testkings, Latest NSE8_812 Exam Tips

Once you have any questions about our NSE8_812 actual exam, you can contact our staff online or send us an email. We have a dedicated all-day online service to help you solve problems. Before purchasing, you may be confused about what kind of NSE8_812 Guide questions you need. You can consult our staff online. After the consultation, your doubts will be solved and you will choose the NSE8_812 learning materials that suit you.

Fortinet NSE8_812 (Fortinet NSE 8 - Written Exam) Certification Exam is a comprehensive examination conducted by Fortinet for information technology professionals and security practitioners. Fortinet NSE 8 - Written Exam (NSE8_812) certification exam targets IT professionals and security experts who aim to obtain knowledge and skills in designing, deploying, configuring, operating, and troubleshooting complex security solutions using Fortinet's latest products and best practices.

>> Updated NSE8_812 Testkings <<

Latest NSE8_812 Exam Tips - NSE8_812 Sample Exam

The easy to learn format of these amazing NSE8_812 exam questions will prove one of the most exciting exam preparation experiences of your life! When you are visiting on our website, you can find that every button is easy to use and has a swift response. And there are three varied versions of our NSE8_812 learning guide: the PDF, Software and APP online. Every version of our NSE8_812 simulating exam is auto installed if you buy and study with them. They are perfect in every detail.

The NSE8_812 certification is a globally recognized certification that demonstrates your expertise in advanced security concepts and Fortinet products. Achieving this certification can open up new career opportunities, increase your earning potential, and provide you with the skills and knowledge needed to design and implement advanced security solutions using Fortinet products. Additionally, the NSE8_812 Certification is a requirement for certain advanced-level Fortinet partner programs, making it a valuable credential for Fortinet partners and resellers.

Fortinet NSE 8 - Written Exam (NSE8_812) Sample Questions (Q29-Q34):

NEW QUESTION # 29
A customer with a FortiDDoS 200F protecting their fibre optic internet connection from incoming traffic sees that all the traffic was dropped by the device even though they were not under a DoS attack. The traffic flow was restored after it was rebooted using the GUI. Which two options will prevent this situation in the future?
(Choose two)

A. Move the internet connection from the SFP interfaces to the LC interfaces
B. Create an HA setup with a second FortiDDoS 200F
C. Change the Adaptive Mode.
D. Replace with a FortiDDoS 1500F

Answer: B,D

Explanation:
* B is correct because creating an HA setup with a second FortiDDoS 200F will provide redundancy in case one of the devices fails. This will prevent all traffic from being dropped in the event of a failure.
* D is correct because the FortiDDoS 1500F has a larger throughput capacity than the FortiDDoS 200F.
This means that it will be less likely to drop traffic even under heavy load.
The other options are incorrect. Option A is incorrect because changing the Adaptive Mode will not prevent the device from dropping traffic. Option C is incorrect because moving the internet connection from the SFP interfaces to the LC interfaces will not change the throughput capacity of the device.
References:
* FortiDDoS 200F Datasheet | Fortinet Document Library
* FortiDDoS 1500F Datasheet | Fortinet Document Library
* High Availability (HA) on FortiDDoS | FortiDDoS / FortiOS 7.0.0 - Fortinet Document Library

NEW QUESTION # 30
Refer to the exhibits.

The exhibits show a FortiGate network topology and the output of the status of high availability on the FortiGate.
Given this information, which statement is correct?

A. The cluster mode can support a maximum of four (4) FortiGate VMs
B. The cluster members are on the same network and the IP addresses were statically assigned.
C. FGVMEVLQOG33WM3D and FGVMEVGCJNHFYI4A share a virtual MAC address.
D. The ethertype values of the HA packets are 0x8890, 0x8891, and 0x8892

Answer: C

Explanation:
The output of the status of high availability on the FortiGate shows that the cluster mode is active-passive, which means that only one FortiGate unit is active at a time, while the other unit is in standby mode. The active unit handles all traffic and also sends HA heartbeat packets to monitor the standby unit. The standby unit becomes active if it stops receiving heartbeat packets from the active unit, or if it receives a higher priority from another cluster unit. In active-passive mode, all cluster units share a virtual MAC address for each interface, which is used as the source MAC address for all packets forwarded by the cluster. References: https://docs.fortinet.com/document/fortigate/6.4.0/cookbook/103439/high-availability-with-two-fortigates

NEW QUESTION # 31
Refer to the exhibit.

To facilitate a large-scale deployment of SD-WAN/ADVPN with FortiGate devices, you are tasked with configuring the FortiGate devices to support injecting of IKE routes on the ADVPN shortcut tunnels.
Which three commands must be added or changed to the FortiGate spoke config vpn ipsec phasei-interface options referenced in the exhibit for the VPN interface to enable this capability? (Choose three.)

A. set mode-cfg-allow-client-selector enable
B. set ike-version 1
C. set net-device disable
D. set add-route enable
E. set mode-cfg enable

Answer: A,C,D

Explanation:
A is correct because net-device disable prevents the VPN interface from being added to the routing table as a connected route. This allows IKE routes to be injected instead. D is correct because add-route enable enables IKE route injection on the VPN interface. E is correct because mode-cfg-allow-client-selector enable allows the VPN interface to accept IKE routes from any peer that matches the phase 1 configuration. Reference: https://docs.fortinet.com/document/fortigate/7.0.1/administration-guide/490352/advpn https://docs.fortinet.com/document/fortigate/7.0.1/administration-guide/490352/advpn-configuration

NEW QUESTION # 32
A retail customer with a FortiADC HA cluster load balancing five webservers in L7 Full NAT mode is receiving reports of users not able to access their website during a sale event. But for clients that were able to connect, the website works fine.
CPU usage on the FortiADC and the web servers is low, application and database servers are still able to handle more traffic, and the bandwidth utilization is under 30%.
Which two options can resolve this situation? (Choose two.)

A. Disable SSL between the FortiADC and the web servers
B. Change the persistence rule to LB_PERSIS_SSL_SESSJD.
C. Add a connection-pool to the FortiADC virtual server
D. Add more web servers to the real server poof

Answer: B,C

NEW QUESTION # 33
You must analyze an event that happened at 20:37 UTC. One log relevant to the event is extracted from FortiGate logs:

The devices and the administrator are all located in different time zones Daylight savings time (DST) is disabled
* The FortiGate is at GMT-1000.
* The FortiAnalyzer is at GMT-0800
* Your browser local time zone is at GMT-03.00
You want to review this log on FortiAnalyzer GUI, what time should you use as a filter?

A. 12.37:08
B. 10:37:08
C. 20:37:08
D. 17:37:08

Answer: D

Explanation:
To review this log on FortiAnalyzer GUI, the administrator should use the time filter that matches the local time zone of FortiAnalyzer, which is GMT-0800. Since the log was generated at 20:37 UTC (GMT+0000), the corresponding time in GMT-0800 is 20:37 - 8 hours = 12:37. However, since DST is disabled on FortiAnalyzer, the administrator should add one hour to account for daylight saving time difference, resulting in 12:37 + 1 hour = 13:37. Therefore, the time filter to use is 13:37:08. References: https://docs.fortinet.com/document/fortianalyzer/6.4.0/administration-guide/103664/time-zone-and-daylight-saving-time

NEW QUESTION # 34
......

Latest NSE8_812 Exam Tips: https://www.testbraindump.com/NSE8_812-exam-prep.html